Generation aborted due to errors detected during the verification of the model

[Jasper]

I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
use Modify Database have error message below:
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the verification of the
model.
---------------------------
OK
---------------------------

How can i fix it !???
Thank everyone.

[unknown]

With the model open, run a Check Model on it. Fix the errors.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
Sybase product enhancement requests:
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the verification of the
model.
---------------------------
OK
---------------------------
How can i fix it !???
Thank everyone.

[Jasper]

Hi ~ Mike

I have Check Model. Result Message below :
< to leave out >
Checking table ...
- Table name uniqueness
- Table code uniqueness
- Table name maximum length
- Table code maximum length
- Existence of column
- Existence of index
Warning The following table has no index:
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
- Existence of key
Warning The following table has no key:
-> Table 'dbo'.'RptSetDetail' (<Model>)
- Number of auto-incremented columns
- Existence of reference
Warning The following table has no reference:
-> Table 'dbo'.'BillIDSet' (<Model>)
-> Table 'dbo'.'CloseSet' (<Model>)
-> Table 'dbo'.'Company' (<Model>)
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
-> Table 'dbo'.'SysMsgs' (<Model>)
-> Table 'dbo'.'TaxType' (<Model>)
< to leave out >
0 error(s), 10 warning(s).
The Physical Data Model is correct, no errors were found.

Thank .

"Mike Nicewarner" <"mike[at]datamodel[dot]org">
With the model open, run a Check Model on it. Fix the errors.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the verification of the
model.
---------------------------
OK
---------------------------
How can i fix it !???
Thank everyone.

[unknown]

What are you using for the Modify Database source?
It sounds like you are using an archive PDM (APM).
In that case, that model might be the one with errors.
I'm just guessing here.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
Sybase product enhancement requests:
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
< to leave out >
Checking table ...
- Table name uniqueness
- Table code uniqueness
- Table name maximum length
- Table code maximum length
- Existence of column
- Existence of index
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
- Existence of key
-> Table 'dbo'.'RptSetDetail' (<Model>)
- Number of auto-incremented columns
- Existence of reference
-> Table 'dbo'.'BillIDSet' (<Model>)
-> Table 'dbo'.'CloseSet' (<Model>)
-> Table 'dbo'.'Company' (<Model>)
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
-> Table 'dbo'.'SysMsgs' (<Model>)
-> Table 'dbo'.'TaxType' (<Model>)
< to leave out >
0 error(s), 10 warning(s).
The Physical Data Model is correct, no errors were found.
Thank .

"Mike Nicewarner" <"mike[at]datamodel[dot]org">
With the model open, run a Check Model on it. Fix the errors.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the verification of the
model.
---------------------------
OK
---------------------------
How can i fix it !???
Thank everyone.

[unknown]

Hi ~ Mike
I want to update the database from the model !
I insert new Column, and this new column is not
last(bottom) of Columns.

Thank ^~^

Post by unknown
What are you using for the Modify Database source?
It sounds like you are using an archive PDM (APM).
In that case, that model might be the one with errors.
I'm just guessing here.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
< to leave out >
Checking table ...
- Table name uniqueness
- Table code uniqueness
- Table name maximum length
- Table code maximum length
- Existence of column
- Existence of index
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
- Existence of key
-> Table 'dbo'.'RptSetDetail' (<Model>)
- Number of auto-incremented columns
- Existence of reference
-> Table 'dbo'.'BillIDSet' (<Model>)
-> Table 'dbo'.'CloseSet' (<Model>)
-> Table 'dbo'.'Company' (<Model>)
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
-> Table 'dbo'.'SysMsgs' (<Model>)
-> Table 'dbo'.'TaxType' (<Model>)
< to leave out >
0 error(s), 10 warning(s).
The Physical Data Model is correct, no errors were
found.
Thank .

"Mike Nicewarner" <"mike[at]datamodel[dot]org">
With the model open, run a Check Model on it. Fix the

errors. >>

Post by Jasper

--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the

verification of the >>>model.

Post by Jasper

Post by Jasper
---------------------------
OK
---------------------------
How can i fix it !???
Thank everyone.

[unknown]

OK, I might not be following you here.
As I understand it:
Your model was originally V9.5, and you've upgraded it to V10.
You did a Modify Database, using ODBC to the target database as the
source for your compare. The generation failed due to errors in the
model, but when you do a Check Model, there are no errors, only warnings.

Can you try something as a test?
Reverse engineer the database into a new V10 model.
Add your column to the table in the model.
Run the Modify Database again, as you did before.
(expectation is only the column change)
What do you see in the Compare dialog box?
Do you get the same errors as before?
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
Sybase product enhancement requests:
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
I want to update the database from the model !
I insert new Column, and this new column is not
last(bottom) of Columns.
Thank ^~^

Post by unknown
What are you using for the Modify Database source?
It sounds like you are using an archive PDM (APM).
In that case, that model might be the one with errors.
I'm just guessing here.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
< to leave out >
Checking table ...
- Table name uniqueness
- Table code uniqueness
- Table name maximum length
- Table code maximum length
- Existence of column
- Existence of index
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
- Existence of key
-> Table 'dbo'.'RptSetDetail' (<Model>)
- Number of auto-incremented columns
- Existence of reference
-> Table 'dbo'.'BillIDSet' (<Model>)
-> Table 'dbo'.'CloseSet' (<Model>)
-> Table 'dbo'.'Company' (<Model>)
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
-> Table 'dbo'.'SysMsgs' (<Model>)
-> Table 'dbo'.'TaxType' (<Model>)
< to leave out >
0 error(s), 10 warning(s).
The Physical Data Model is correct, no errors were
found.
Thank .

"Mike Nicewarner" <"mike[at]datamodel[dot]org">
With the model open, run a Check Model on it. Fix the

errors. >>

Post by Jasper

--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the

verification of the >>>model.

Post by Jasper

Post by Jasper
---------------------------
OK
---------------------------
How can i fix it !???
Thank everyone.

[Jasper]

Hi ~ Mike

Thank your suggestion !
I do Reverse engineer the database into a new V10 model.
and I know what is point.
the point is Column's Comment.
if I type english comment is OK !
if I type chinese comment is Error !

ps1.I have screen record(PD10EBF11.avi 6.5M).
May I Send to your eMail !?
ps2.My Column'S Comment Script below:
[execute ]sp_addextendedproperty
N'MS_Description',
N%.q:COMMENT%,
N'user',
N%.q:OWNER%,
N'table',
N%.q:TABLE%,
N'column',
N%.q:COLUMN%

How can i fix it !? or waiting EBF12 !?
Thank YOU !



"Mike Nicewarner" <"mike[at]datamodel[dot]org">

Post by unknown
OK, I might not be following you here.
Your model was originally V9.5, and you've upgraded it to V10.
You did a Modify Database, using ODBC to the target database as the source
for your compare. The generation failed due to errors in the model, but
when you do a Check Model, there are no errors, only warnings.
Can you try something as a test?
Reverse engineer the database into a new V10 model.
Add your column to the table in the model.
Run the Modify Database again, as you did before.
(expectation is only the column change)
What do you see in the Compare dialog box?
Do you get the same errors as before?
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
I want to update the database from the model !
I insert new Column, and this new column is not
last(bottom) of Columns.
Thank ^~^

Post by unknown
What are you using for the Modify Database source?
It sounds like you are using an archive PDM (APM).
In that case, that model might be the one with errors.
I'm just guessing here.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
< to leave out >
Checking table ...
- Table name uniqueness
- Table code uniqueness
- Table name maximum length
- Table code maximum length
- Existence of column
- Existence of index
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
- Existence of key
-> Table 'dbo'.'RptSetDetail' (<Model>)
- Number of auto-incremented columns
- Existence of reference
-> Table 'dbo'.'BillIDSet' (<Model>)
-> Table 'dbo'.'CloseSet' (<Model>)
-> Table 'dbo'.'Company' (<Model>)
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
-> Table 'dbo'.'SysMsgs' (<Model>)
-> Table 'dbo'.'TaxType' (<Model>)
< to leave out >
0 error(s), 10 warning(s).
The Physical Data Model is correct, no errors were
found.
Thank .

"Mike Nicewarner" <"mike[at]datamodel[dot]org">
With the model open, run a Check Model on it. Fix the

errors. >>

Post by Jasper

--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the

verification of the >>>model.

Post by Jasper

Post by Jasper
---------------------------
OK
---------------------------
How can i fix it !???
Thank everyone.

[unknown]

I wonder if this has been fixed in V11. Can you download the V11 trial,
and try to reproduce your problem with that version of PD? You may not
have to wait until V12. I'd help, but I don't have anything in Chinese.

If this doesn't work in V11, then you will need to report the bug to
Sybase tech support so they can get it fixed. Supporting multi-lingual
environments is important to Sybase.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
Sybase product enhancement requests:
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
Thank your suggestion !
I do Reverse engineer the database into a new V10 model.
and I know what is point.
the point is Column's Comment.
if I type english comment is OK !
if I type chinese comment is Error !
ps1.I have screen record(PD10EBF11.avi 6.5M).
May I Send to your eMail !?
[execute ]sp_addextendedproperty
N'MS_Description',
N%.q:COMMENT%,
N'user',
N%.q:OWNER%,
N'table',
N%.q:TABLE%,
N'column',
N%.q:COLUMN%
How can i fix it !? or waiting EBF12 !?
Thank YOU !
"Mike Nicewarner" <"mike[at]datamodel[dot]org">

Post by unknown
OK, I might not be following you here.
Your model was originally V9.5, and you've upgraded it to V10.
You did a Modify Database, using ODBC to the target database as the source
for your compare. The generation failed due to errors in the model, but
when you do a Check Model, there are no errors, only warnings.
Can you try something as a test?
Reverse engineer the database into a new V10 model.
Add your column to the table in the model.
Run the Modify Database again, as you did before.
(expectation is only the column change)
What do you see in the Compare dialog box?
Do you get the same errors as before?
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
I want to update the database from the model !
I insert new Column, and this new column is not
last(bottom) of Columns.
Thank ^~^

Post by unknown
What are you using for the Modify Database source?
It sounds like you are using an archive PDM (APM).
In that case, that model might be the one with errors.
I'm just guessing here.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
< to leave out >
Checking table ...
- Table name uniqueness
- Table code uniqueness
- Table name maximum length
- Table code maximum length
- Existence of column
- Existence of index
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
- Existence of key
-> Table 'dbo'.'RptSetDetail' (<Model>)
- Number of auto-incremented columns
- Existence of reference
-> Table 'dbo'.'BillIDSet' (<Model>)
-> Table 'dbo'.'CloseSet' (<Model>)
-> Table 'dbo'.'Company' (<Model>)
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
-> Table 'dbo'.'SysMsgs' (<Model>)
-> Table 'dbo'.'TaxType' (<Model>)
< to leave out >
0 error(s), 10 warning(s).
The Physical Data Model is correct, no errors were
found.
Thank .

"Mike Nicewarner" <"mike[at]datamodel[dot]org">
With the model open, run a Check Model on it. Fix the

errors. >>

Post by Jasper

--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the

verification of the >>>model.

Post by Jasper

Post by Jasper
---------------------------
OK
---------------------------
How can i fix it !???
Thank everyone.

[Jasper]

Hi ~ Mike
Please Help !
I Change a new computer and install PD10EBF11.
I Reverse engineer to new model
Insert new Column, and this new column is not last(bottom) of Columns
Modify Database
the Error show AGAIN,,,,,,,, why ?
no any ColumnComment ! Original SQL Server 2000 DBMS definition !

Generation aborted due to errors detected during the


"Mike Nicewarner" <"mike[at]datamodel[dot]org">

Post by unknown
I wonder if this has been fixed in V11. Can you download the V11 trial,
and try to reproduce your problem with that version of PD? You may not
have to wait until V12. I'd help, but I don't have anything in Chinese.
If this doesn't work in V11, then you will need to report the bug to
Sybase tech support so they can get it fixed. Supporting multi-lingual
environments is important to Sybase.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
Thank your suggestion !
I do Reverse engineer the database into a new V10 model.
and I know what is point.
the point is Column's Comment.
if I type english comment is OK !
if I type chinese comment is Error !
ps1.I have screen record(PD10EBF11.avi 6.5M).
May I Send to your eMail !?
[execute ]sp_addextendedproperty
N'MS_Description',
N%.q:COMMENT%,
N'user',
N%.q:OWNER%,
N'table',
N%.q:TABLE%,
N'column',
N%.q:COLUMN%
How can i fix it !? or waiting EBF12 !?
Thank YOU !
"Mike Nicewarner" <"mike[at]datamodel[dot]org">

Post by unknown
OK, I might not be following you here.
Your model was originally V9.5, and you've upgraded it to V10.
You did a Modify Database, using ODBC to the target database as the
source for your compare. The generation failed due to errors in the
model, but when you do a Check Model, there are no errors, only warnings.
Can you try something as a test?
Reverse engineer the database into a new V10 model.
Add your column to the table in the model.
Run the Modify Database again, as you did before.
(expectation is only the column change)
What do you see in the Compare dialog box?
Do you get the same errors as before?
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
I want to update the database from the model !
I insert new Column, and this new column is not
last(bottom) of Columns.
Thank ^~^

Post by unknown
What are you using for the Modify Database source?
It sounds like you are using an archive PDM (APM).
In that case, that model might be the one with errors.
I'm just guessing here.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
< to leave out >
Checking table ...
- Table name uniqueness
- Table code uniqueness
- Table name maximum length
- Table code maximum length
- Existence of column
- Existence of index
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
- Existence of key
-> Table 'dbo'.'RptSetDetail' (<Model>)
- Number of auto-incremented columns
- Existence of reference
-> Table 'dbo'.'BillIDSet' (<Model>)
-> Table 'dbo'.'CloseSet' (<Model>)
-> Table 'dbo'.'Company' (<Model>)
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
-> Table 'dbo'.'SysMsgs' (<Model>)
-> Table 'dbo'.'TaxType' (<Model>)
< to leave out >
0 error(s), 10 warning(s).
The Physical Data Model is correct, no errors were
found.
Thank .

"Mike Nicewarner" <"mike[at]datamodel[dot]org">
With the model open, run a Check Model on it. Fix the

errors. >>

Post by Jasper

--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the

verification of the >>>model.

Post by Jasper

Post by Jasper
---------------------------
OK
---------------------------
How can i fix it !???
Thank everyone.

[unknown]

Yes, I know you were having trouble with V10.
Have you tried it with V11 yet?
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
Sybase product enhancement requests:
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
Please Help !
I Change a new computer and install PD10EBF11.
I Reverse engineer to new model
Insert new Column, and this new column is not last(bottom) of Columns
Modify Database
the Error show AGAIN,,,,,,,, why ?
no any ColumnComment ! Original SQL Server 2000 DBMS definition !
Generation aborted due to errors detected during the
"Mike Nicewarner" <"mike[at]datamodel[dot]org">

Post by unknown
I wonder if this has been fixed in V11. Can you download the V11 trial,
and try to reproduce your problem with that version of PD? You may not
have to wait until V12. I'd help, but I don't have anything in Chinese.
If this doesn't work in V11, then you will need to report the bug to
Sybase tech support so they can get it fixed. Supporting multi-lingual
environments is important to Sybase.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
Thank your suggestion !
I do Reverse engineer the database into a new V10 model.
and I know what is point.
the point is Column's Comment.
if I type english comment is OK !
if I type chinese comment is Error !
ps1.I have screen record(PD10EBF11.avi 6.5M).
May I Send to your eMail !?
[execute ]sp_addextendedproperty
N'MS_Description',
N%.q:COMMENT%,
N'user',
N%.q:OWNER%,
N'table',
N%.q:TABLE%,
N'column',
N%.q:COLUMN%
How can i fix it !? or waiting EBF12 !?
Thank YOU !
"Mike Nicewarner" <"mike[at]datamodel[dot]org">

Post by unknown
OK, I might not be following you here.
Your model was originally V9.5, and you've upgraded it to V10.
You did a Modify Database, using ODBC to the target database as the
source for your compare. The generation failed due to errors in the
model, but when you do a Check Model, there are no errors, only warnings.
Can you try something as a test?
Reverse engineer the database into a new V10 model.
Add your column to the table in the model.
Run the Modify Database again, as you did before.
(expectation is only the column change)
What do you see in the Compare dialog box?
Do you get the same errors as before?
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
I want to update the database from the model !
I insert new Column, and this new column is not
last(bottom) of Columns.
Thank ^~^

Post by unknown
What are you using for the Modify Database source?
It sounds like you are using an archive PDM (APM).
In that case, that model might be the one with errors.
I'm just guessing here.
--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to change?)
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
Hi ~ Mike
< to leave out >
Checking table ...
- Table name uniqueness
- Table code uniqueness
- Table name maximum length
- Table code maximum length
- Existence of column
- Existence of index
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
- Existence of key
-> Table 'dbo'.'RptSetDetail' (<Model>)
- Number of auto-incremented columns
- Existence of reference
-> Table 'dbo'.'BillIDSet' (<Model>)
-> Table 'dbo'.'CloseSet' (<Model>)
-> Table 'dbo'.'Company' (<Model>)
-> Table 'dbo'.'MemoReg' (<Model>)
-> Table 'dbo'.'MemoSet' (<Model>)
-> Table 'dbo'.'SysMsgs' (<Model>)
-> Table 'dbo'.'TaxType' (<Model>)
< to leave out >
0 error(s), 10 warning(s).
The Physical Data Model is correct, no errors were
found.
Thank .

"Mike Nicewarner" <"mike[at]datamodel[dot]org">
With the model open, run a Check Model on it. Fix the

errors. >>

Post by Jasper

--
Mike Nicewarner [TeamSybase]
http://www.datamodel.org
mike[at]datamodel[dot]org (can you figure what to
http://www.isug.com/cgi-bin/ISUG2/submit_enhancement

Post by Jasper
I use PD10.1 EBF11 to open PD9.5.2's C1.pdm.
---------------------------
PowerDesigner - Error
---------------------------
Generation aborted due to errors detected during the

verification of the >>>model.

Post by Jasper

Post by Jasper
---------------------------
OK
---------------------------
How can i fix it !???
Thank everyone.